js345金沙城娱乐场线路-金沙1333js备用地址

什么是叉车的轴重分布?

叉车百科叉车配件2021-04-29 08:51打印
      轴重分布就是整满载和空载情况下,将载荷分配到工业车辆的轮轴上,对于在轴距区域内运输和升举负载的工业车辆,即使在负载条件下,两个轴的负载也相对均匀。对于叉车,即平衡重式叉车,在拾起负载后前轴上的负载会更高。在负载状态下,后轴的松动程度可保持方向盘和驱动轮的抓地力,从而满足稳定性要求。
      厦门永新昌致力于各种机械设备的销售、维修保养。 厦门叉车  电动叉车  叉车维修  二手叉车   
      

Distribution of the load to the wheel axles of an industrial truck in laden or unloaded condition. For industrial trucks that transport and lift their load within the wheelbase area,
both axles are loaded relatively evenly even in loaded condition. For forklift trucks, i.e. counterbalanced lift trucks, the load on the front axle is higher after load pick-up.
In loaded condition the rear axle is relieved to an extent where road-holding is maintained for the steering and drive wheels and the stability prerequisites are fulfilled.

相关文章

换一换